Table of Contents
Advertisement
3 Setting Procedures
3-4.
Waveform tab
Various indicated values such as torque, rotation speed and power as well as waveform data are
acquired and displayed.
Chapter
3
Waveform tab
(1) Cursor display switch
(2) Waveform
(3) Indicated values
(4) Setting conditions for waveform acquisition
12
12
(1)
(5)
Cursor display can be selected after waveform data is acquired or when historical data is shown.
Torque, rotation speed and power waveform are displayed from the upper section respectively.
Current indicated values of the torque, rotation speed and power as well as the maximum,
minimum and average values of the waveform data are displayed from the upper section
respectively.
Settings related to the waveform display and data acquisition can be performed.
Refer to P.13 "Setting conditions for waveform acquisition" for details.
(2)
(3)
(6)
(4)
Advertisement
Table of Contents
