Advertisement
Quick Links
RS-EZ series
Cover Plate
Screws (4)
Hanging Bracket
Terminal
Block
Speaker
Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Install Instructions For:
RS42-EZ, RS62-EZ, RS82-EZ, HP82-EZ
Weather plug
Cover Plate
Hanging Hardware
Tap Switch
1.435.647.9555
© 2012 SoundTube Entertainment, Inc. All rights reserved. PN INS-RS-EZ Rev 03.01.12
Warning
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Box contents
1 Speaker
1 Cover Plate w/ 4 screws
1 Rubber weather plug
1 Hanging kit
|
|
800.647.TUBE
www.soundtube.com
Advertisement
Related Manuals for SoundTube RS-EZ Series
Summary of Contents for SoundTube RS-EZ Series
- Page 1 Warning Warning SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for Do not spec or install speaker near support beam, ventilation duct or optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
- Page 2 RS-EZ series Install Instructions For: 1.435.647.9555 800.647.TUBE www.soundtube.com RS42-EZ, RS62-EZ, RS82-EZ, HP82-EZ Unpack speaker and Thread hanging or safety Attach the hanging cable Thread cable end(s) SpeedClamp™ mounting cable through SpeedClamp™ by securing it and safety through SpeedClamp™ hardware. mechanisms as shown.
- Page 3 RS-EZ series Install Instructions For: 1.435.647.9555 800.647.TUBE www.soundtube.com RS42-EZ, RS62-EZ, RS82-EZ, HP82-EZ Conduit Installation: 4. Run signal wire and at Unpack speaker from box. 2. Securely mount conduit 3. Thread cover plate on to least one safety cable to structure. Conduit must conduit until secure.
Need help?
Do you have a question about the RS-EZ Series and is the answer not in the manual?
Questions and answers