Advertisement
Quick Links
RS1201i-SuperT
Secure anchor point
Hanging or safety cable
SpeedClamp™
Safety cable with clip
Signal wire
Terminal weather boot
Euroblock connector
Euroblock jack
Surface-mount
bracket insert
RS1201i-SuperT™
Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
™
RS1201i-SuperT™
Hanging cable with clip
913.663.5600
© 2008 SoundTube Entertainment, Inc. All rights reserved. PN INS-RS1201i Rev 2.18.20
Warning
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Box contents
1 Speaker
2 SpeedClamps™
1 Release key (small hex wrench)
1 Hanging cable
1 Safety cable
1 Terminal weather boot
1 Euroblock connector
1 Grille-mounted tap switch cover
4 Zip ties
Grille-mounted
tap switch cover
(except RS4-EZ)
|
|
800.647.TUBE
www.soundtube.com
Advertisement
Related Manuals for SoundTube RS1201i-SuperT
Summary of Contents for SoundTube RS1201i-SuperT
- Page 1 Warning Warning SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for Do not spec or install speaker near support beam, ventilation duct or optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
- Page 2 Cable cover available for asthetic applications (SLT-10). SoundTube also provides optional surface-mount brackets for both the RS and HP lines of products. Installation instructions for these accessories are included with specific accessory packaging.
Need help?
Do you have a question about the RS1201i-SuperT and is the answer not in the manual?
Questions and answers