SoundTube RS1001i-II Specifications

RS1001i
-
Specifications: RS1001i-II
System Type
Impedance (nominal)
1
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M
2
Distance Factor
Frequency Response (- 3 dB)
Frequency Response (-10 dB)
Max. Program Power 4
Max. Continuous Power RMS
Max. UL program power
Max. Power SPL @ 1 M
6
Max. SPL @ x% distortion 7
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer - High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Height (SM = Height)
Diameter (SM = Width)
Weight
Shipping Weight
Accessories
Included
Packaging
1 Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance
2
1w1m sensitivity determined using nominal
impedance
3
Frequency response measured in half or
full space as dictated by speaker mounting
configuration
4
Max program power is 3 dB above max
continuous power
5
Continuous power rating, EIA-426-B test
6
Max output based on max continuous power
7
Max useable SPL based on testing
by NWAA Labs
© 2007 SoundTube Entertainment, Inc. All rights reserved. PN TS-RS801 REV 12.05.07
ll
Open-Ceiling Speaker
Technical Information for System Engineers
10" Subwoofer, open-ceiling, ported (150 Watt optional
transformer for 25/70.7/100 Volt or 4 ohm direct)
4 ohm
93.5dB
90.5dB
N/A
3 53 Hz - 120 Hz
3 40 Hz - 300 Hz
300w
5 150w
100w
112.5dB
N/A
N/A
N/A
N/A
N/A
5-Position rotary switch with 4 ohm direct
1 x 254mm (10in) Polypropylene cone, butyl rubber surround
N/A
35.0mm 1.38in
100.0 kHz
6dB per octave, 1st order
N/A
Injection molded ABS, glass fiber reinforced
N/A
Iridite-plated steel with powder-coat finish
4 Pin, 5mm Euroblock for individual or daisy chain connection
Black or white
17.23 in / 437.6 mm
14.82 in / 376.4 mm
27.0 lb / 12.3 kg
32.5 lb / 14.8 kg
Hanging hardware, Euroblock connector & terminal
weather boot
1 per box
Transformer Taps
70.7 V Output 100 V Output
150w 112.5dB 150w 112.5dB
75w 109.5dB 75w 109.5dB
38w 106.5dB 38w 106.5dB
19w 103.5dB

Key Features

• One 254 mm (10.0 in) polypropylene
• Weatherized components for indoor
• Includes hanging hardware with aircraft
• Patented ZeroReflection
• Easy access 5-position selectable tap
• Iridite-plated steel grille with protective
• 93.5 dB Sensitivity offers high-output
• UL 1480 rev. 5, CE approval (EMC Direc-
• High-quality black or white paint finish.
Description
an open-ceiling enclosure design that
delivers additional low-end response (40
Hz) for satellite/subwoofer applications.
The RS1001i-II speaker design incorporates
a low-profile grille, 5-position tap switch
with voice coil/4 Ohm direct. Hanging
hardware is included & features Speed-
Clamp
easy & secure installation.
Applications
ground subwoofer applications, the
RS1001i-II includes a single point mount-
25 V Output
ing system for rapid open-ceiling installa-
19w 103.5dB
tions. True low-end response (40 Hz) and
9.5w 100.5dB
high sensitivity (90.5 dB 1W/1M) make
4.8w 97.5dB
the RS1001i-II ideal for additional bass
2.4w 94.5dB
response in retail, restaurants and other
open-ceiling subwoofer applications.
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube's drive for constant improvement.
woofer mounted to a proprietary cast-
aluminum M8 baffle and heat sink.
™
& outdoor applications.
cables and integrated SpeedClamp
self-locking cable grip for fast, easy &
secure installation.
enclosure tech-
™
nology for optimal sound reproduction
& cabinet rigidity. Also includes Eurob-
lock connector & terminal weather boot.
switch for 25, 70.7 and 100 Volt applica-
tions with 4 Ohm bypass simplifies
ordering and inventory tracking.
powder-coated finish for lasting durability.
capabilities & reduced amplification costs.
tive 89/366/EEC, EN55020, EN55013), Mil-
spec 810 & IEC529 approval pending.
Custom paint colors optional.
The RS1001i-II is a 10" subwoofer with
self-locking cable grip for fast,
™
Designed for indoor & outdoor back-
™