Table of Contents
Advertisement
0 PLAY button
Press this button, lighting it, to start
playback. Recording starts when you
press this button together with the
REC/SEQ button, and manual editing
starts when you press this button
together with the EDIT button. If you
press this button only during recording
or manual editing, recording or
manual editing stops and the unit
returns to playback mode.
This button is also used to display the
shot data if it is recorded on the tape.
For details, see 5-1-3 "Reading Shot
Data".
!¡ Jog and shuttle dials
To search in shuttle or variable mode,
rotate the outer ring (shuttle dial). To
search in jog mode, press the inner
ring (jog dial) until it clicks and then
rotate. Rotate in the clockwise
direction to search in the forward
direction (the FORWARD indicator
lights), and rotate in the
counterclockwise direction to search
in the reverse direction (the
REVERSE indicator lights).
For more information about search,
see page 3-3.
!™ SERVO indicator
Lights when the drum servo and
capstan servo are locked.
!£ PLAYER/DMC and
RECORDER buttons/indicators
When two DNW-A25/A25P units are
combined and connected via the
REMOTE (9-pin) connectors, press to
control one unit from another.
PLAYER/DMC button: The
buttons of the editing and tape
transport sections on the recorder
side of the control panel work to
control the player unit.
You can also press this button
together with the ENTRY/SHIFT
button to put the combined units
into DMC edit mode.
For details, see 3-5 "DMC Editing".
RECORDER button: The buttons
of the editing and tape transport
sections on the recorder side of
the control panel work to control
the recorder itself.
!¢ EJECT button
Press to eject the cassette or open the
cassette compartment !¶. The button
lights while the cassette is being
ejected. If you insert a cassette which
cannot be used on this unit, the button
flashes. Press the button to eject the
cassette.
!∞ REW (rewind) button
Press this button, lighting it, to rewind
the tape.
When using a tape on which shot
marks have been recorded, you can
press this button together with the
TRIM –/LIST button to read shot
marks from the tape, and press this
button together with the TRIM +/
MARK button to cue up shot mark
positions.
For details, see Chapter 5 "Shot
Mark/Shot Data".
1-11
Overview
Advertisement
Table of Contents
