Table of Contents
Advertisement
Basic Menu
Item number
Item name
a)
009
CHARACTER TYPE
011
a)
CHARACTER V-SIZE
013
525/625 SYSTEM
SELECT
a) When setting items 002, 003, 009, and 011, watch the monitor screen, and adjust to the required
state.
6-4
Setup Menu
Settings
Determines the type of character information
(timecode, etc) which is superimposed on output
from the VIDEO OUTPUT 2(SUPER) connector and
display on the LCD monitor.
WHITE : White letters on a black background.
BLACK: Black letters on a white background.
W/OUT: White outline letters.
B/OUT: Black outline letters.
Determines the vertical size of character
information (timecode, etc) which is superimposed
on output from the VIDEO OUTPUT 2(SUPER)
connector and display on the LCD monitor.
× 1 : Standard size
× 2: 2 times standard size
× 3: 3 times standard size
× 4: 4 times standard size
Specify whether to enable switching between the
525 (NTSC) and 625 (PAL) systems.
OFF : Do not enable system switching.
ON: Enable system switching.
Setting this item to ON and switching the system
enables the unit to operate in the system switched
to.
Notes
• All items in the setup menu are set to the current
values for the system switched to (different from
the values for the original system).
• For Betacam/Betacam SP cassettes, only simple
viewing is possible.
For details about switching procedure, see
"Switching between 525/625 line systems (menu
item 013)" on page 6-8.
Advertisement
Table of Contents
