Table of Contents
Advertisement
Extended Menu
Menu items in the 200s, relating to the remote control interface
Item number
Item name
201
PARA RUN
202
CF FLAG (only valid
in 625 mode)
Menu items in the 300s, relating to editing operations
Item number
Item name
301
VAR SPEED RANGE
FOR
SYNCHRONIZATION
302
CAPSTAN
RE-LOCKING
DIRECTION
305
SYNC GRADE
6-14
Setup Menu
Settings
Select whether or not to use synchronized
operation for two or more VTRs.
DIS : No synchronized operation.
ENA: Use synchronized operation.
Note
To use synchronized operation for two or more
VTRs, set item 201 to "ENA" on all of the VTRs.
Select the mode for locking color framing sent to a
remote control unit.
8F : Eight-field locking mode
4F/8F: Four- or eight-field locking mode
Settings
Select the playback speed range when carrying out
playback in variable mode from a remote control
unit connected to the REMOTE (9P) connector.
–1~+1: –1 to +1 times normal speed.
~1.5 : –1.5 to +1.5 times normal speed.
In 525 mode
When the CAPSTAN in the sub LCD menu is set to
4FD, select whether the capstan servo should lock
by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL : Lock by accelerating.
In 625 mode
When the CAPSTAN in the sub LCD menu is set to
4FD or 8FD, select whether the capstan servo
should lock by accelerating or decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.
When editing in phase-synchronized mode with
item 004 set to ON, select the target phase
synchronization accuracy.
ACCUR : ± 0 frame accuracy.
ROUGH: ± 1 frame accuracy.
Advertisement
Table of Contents
