Table of Contents
Advertisement
Information Displayed on the LCD
Monitor
The LCD monitor displays setup
menus, error messages, time data, and
information about the unit's operating
status.
For more information about the setup
menus, see chapter 6 "Setup Menu".
To adjust the screen
Use the BRIGHT and CONTRAST
knobs to adjust the brightness and
contrast of the screen.
To make the back light brighter, set
the BACKLGT in the sub LCD menu
to HIGH (see page 2-31).
To display superimposed text
information
To display superimposed time data
and text information about the
operating status of the unit, set the
SUPER in the sub LCD menu to ALL
(see page 2-30).
When SUPER is set to ALL or
CPSTALL, the text information is also
superimposed on the output of VIDEO
OUTPUT connector 2 (SUPER).
To adjust the displayed text
You can adjust the position, size, and
type of superimposed information
using setup menu items 002, 003, 009,
and 011.
For details, see pages 6-2 and 6-4.
The figure on next page shows the
time data and operation status that can
be superimposed.
A-11
Appendixes
Advertisement
Table of Contents
