Subscribe to Our Youtube Channel
Related Manuals for Seville Classics UltraHD UltraGuard 20238
Summary of Contents for Seville Classics UltraHD UltraGuard 20238
- Page 1 ASSEMBLY INSTRUCTIONS UltraHD Rolling Cabinet (Model No. 20238) 28"W X 18" D X 34.5" H (71.1cm x 45.7cm x 87.6cm) Reference page 9 for special care and maintenance of stainless steel TR160309...
- Page 2 (pg 1 of 10) (#12) Drawer #12-3 #12-1 #12-2 #12-5 #12-4...
-
Page 3: Parts List
PARTS LIST (pg 2 of 10) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 10 of 10). (#1) Stainless Steel Top x 1 PC (#2) Upper Back Panel x 1 PC (#3) Bottom Back Panel x 1 PC (#4) Left Side Panel x 1 PC... - Page 4 PARTS LIST (pg 3 of 10) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 10 of 10). (#9) Swivel Wheel with Brake x 2 PCS (#10) Swivel Wheel W/O Brake x 2 PCS (#23) Magnet x 2 PCS (#12-1) Drawer Front Panel x 1 PC...
- Page 5 PARTS LIST (pg 4 of 10) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 10 of 10). (#13) Drawer Mat X 1 PC (#18) Left Door x 1 PC (#19) Right Door x 1 PC (#34) Hook X 4 PCS...
- Page 6 UltraHD Rolling Cabinet (Model No. 20238) (pg 5 of 10) Step 1. Open the package, remove and place all parts to the side. Then open the package of the Stainless Steel Top Front (#1). Note: The Stainless Steel Top is packed within an inner cardboard box.
- Page 7 UltraHD Rolling Cabinet (Model No. 20238) (pg 6 of 10) Install the Upper Back Panel (#2) Step 5. Attach the Upper Back Panel (#2) between the Left Panel (#4) and Right Panel (#5). Make sure the “Top” of the Upper Back Panel (#2) is on the Stainless Steel Top (#1) as the sticker indicates.
- Page 8 UltraHD Rolling Cabinet (Model No. 20238) (pg 7 of 10) Step 9. Install Drawer Base Panel and Drawer Front #12-4 (#12-4 and #12-1 ). Fit and attach Drawer Base Panel (#12-4) into the back slot of stainless steel Drawer Front (#12-1), use 3pcs Screw B (#15) to tighten.
- Page 9 UltraHD Rolling Cabinet (Model No. 20238) (pg 8 of 10) Step 12. Install Drawer (#12) into cabinet 1). Pull out both slides for drawer. Hook the drawer between both slides, make sure the slide hooks are completely inserted into the square holes on the drawer side panels.
- Page 10 UltraHD Rolling Cabinet (Model No. 20238) (pg 9 of 10) Step 15. Install Middle Shelf (#8). 1). Decide the height for the Middle Shelf (#8). Place 4pcs of (#34) Hook into the hook slot where each corner of shelf should be placed. Make sure the hooks supporting each shelf are at same height.
-
Page 11: Contact Information
(pg 10 of 10) *If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our bilingual (English/Spanish) customer service department at: Seville Classics, Inc. 19401 South Harborgate Way Torrance, CA 90501 Telephone: (800) 323-5565 within USA... - Page 12 UltraHD Line Model No. 20204 Model No. 20206 UltraHD 6- Drawer Rolling UltraHD Workbench C bi t Model No. 20262 Model No. 20267 UltraHD Rolling Workbench UltraHD Workcenter Model No. 20215 Model No. 20255 UltraHD Trash Bin UltraHD Tool Box...
Need help?
Do you have a question about the UltraHD UltraGuard 20238 and is the answer not in the manual?
Questions and answers