How to Fold the Gate
1.
Remove the Bolts on the Leg to separate the Leg from the Main Frame.
2.
Fold the gate by closing the Side Panel inward:
① Hold the Side Panel, then gently lift up on the Door Panel.
② Then lift up the Top Width Adjustment Connector to close the Side Panel inward.
l Wipe off this product with washing cloth after squeezed firmly using a mild detergent and water. Do not use a scrub brush
and/or a polishing powder as these may cause scratched, rust and discolor to the product.
l Do not use a scrub brush and/or polishing powder. It would cause discoloration or scratch.
l When using creosol or other disinfectants, make sure to dilute them as instructed to avoid discoloration and paint stripping.
l Do not use harsh chemicals such as thinner, benzene or alcohol. It would cause discoloration or paint stripping.
UPC
Minimum Width
Dimension
Maximum Width
When folded
Material
l Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l There may be coating cracks at some joints and each product may experience different coloration of the wood grain as frames are made of
natural wood.
l If you find something wrong with this product, please let us know. Thank you!
Space between
Space between
Top / Bottom Width
Top / Bottom Width
Adjustment Connectors
Adjustment Connectors
803840 94948 1 / 803840 94949 8 / 803840 94950 4
55"W x 20.5"D x 24"H
72"W x 16"D x 24"H
55"W x 9"D x 24"H
Frame: Natural wood Wire: Steel (Polyester coating) Lock: Polypropylen
Door Stem: ABS resin Frame Stem: Polyacetal Rubber Skid: Elastomer
Side Panel opens
4
Side Panel closes