Advertisement
Available languages
Available languages
1.
How to open the Side Panel
First, open the Side Panel to stand the gate up
(the gate does not stand by itself at this time).
①
Push up the Door Panel gently.
②
Then lift up the Top Width Adjustment Connector
to open the Side Panel.
2.
Adjust the Side Panel to desirable angle
Push down the Door Panel where the Degree Mark and
Adjustment Connector meet each other.
Make sure the Top/Bottom Width Adjustment Connectors are
securely in place. After adjusting the Side Panels to the desirable
angle, the Top/Bottom Width Adjustment Connectors should not
shift. Repeat this step to adjust the opposite Side Panel.
Top view of fixed Side Panel
Door Panel
Caution
Do not use force to push down the Door Panel.
Applying unnecessary force may cause damage to
the Width Adjustment Connector.
3.
Attach Legs to Main Frame
Align the holes on the legs with the bolt holes at the
bottom of the Door Panel. Then, attach the leg from the
back side of Door Panel using the bolts.
4.
Level the Gate using the Adjuster Feet
To level the product to make sure the Door opens/closes
properly, turn the Adjuster Feet located on the bottom of Door Panel
(see
Assembly Check / How to Open and Close the Door
Loosen
Loosen
(Higher)
(Higher)
* Use a Phillips-head screwdriver for assembly.
No space between
No space between
Top / Bottom Width
Top / Bottom Width
Adjustment Connectors
Adjustment Connectors
Top Width Adjustment Connector
Adjustment Degree Mark
Bottom Width Adjustment
Connector
Side Panel
).
Adjuster Feet
Adjuster Feet
Side Panel closes
Top Width
Top Width
Side Panel
Adjustment
Adjustment
Connector
Connector
Bottom Width
Bottom Width
Adjustment Connector
Adjustment Connector
Top view of opened Side Panel
Space between
Space between
Top / Bottom Width
Top / Bottom Width
Adjustment Connectors
Adjustment Connectors
Bolt Hole
2
Door
Door Panel
Door Panel
Door Panel
Leg
Flat Washer
Flat Washer
Spring Washer
Spring Washer
Bolt
Bolt
Advertisement
