Filtering System - Kenwood KID60S18 Installation Instructions Manual

filtering system

The filtering system in the base of the wash cabinet retains coarse debris from the washing cycle.
The collected coarse debris may cause the filters to clog. Check the condition of the filters regularly
and clean them if necessary under running water.
Follow the steps below to clean the filters in the wash cabinet.
1. Ensure the dishwasher is switched off.
2. Turn the coarse filter anti-clockwise and gently lift it out.
3. Gently lift the metal filter and pull out.
4. The centre of the filter can be removed by gently pulling it
apart.Rinse all the filters under running water, including the
filter
cylinder, and then refit all filters in the reverse order.
5. Carefully refit the main filter.
6. Gently turn the coarse filter in clockwise direction until the
arrows align and it clicks into place.
* All images are for reference only; please refer to your individual unit for actual item.
Kenwood Integrated Diswasher KID60S18 Manual.indd 33
33
07/12/2018 12:18