Using The Dishwasher; Changing The Programme; At The End Of The Programme - Kenwood KID60S18 Installation Instructions Manual

Integrated dishwasher
Table of Contents

Advertisement

using the dishwasher

1. Ensure the unit is connected to the mains power and the water supply is on.
2. Open the door and load the baskets. It is recommended that the lower basket is loaded first, and
then the upper basket. Push the baskets back into the dishwasher.
3. Pour in the detergent or place the detergent tablet in the detergent compartment and close
firmly afterwards.
4. Press the
5. Select the wash cycle programme based on the loading and soil requirements. Please refer to
the section "Wash Cycle Table".
6. The display will indicate the selected programme and the time the programme will take.
7. Close the dishwasher door. A click should be heard when the door is closed correctly.
Do not slam the door.
8. The washing cycle will begin shortly.
If you open the dishwasher door during the washing cycle and then close it, the dishwasher
will continue the current washing programme after 10 seconds.

changing the programme

To change the programme once a washing cycle has already started, follow the steps below.
1. Open the door slightly to avoid water spillage before opening the door fully. Check if the unit has
dispensed the detergent or detergent tablet. This will depend on how long the washing cycle was
running for. The last selected programme will appear on the window display.
2. If the detergent dispenser lid is opened, we suggest that you allow the wash cycle to finish.
3. If the detergent dispenser lid is still closed, press and hold down the P button for 3 seconds to
cancel the programme. End of program indicator flashes and the display window shows "1".
You can then select the required new programme button and close the dishwasher door.
The new washing cycle will start shortly.

at the end of the programme

At the end of the programme, the dishwasher will beep and the end of program indicator will light up.
The condensation strip helps to prevent the risk of steam damage to the worktop edging
above the dishwasher, it is advisable to leave the door closed until you are ready to unload
the dishwasher.
* All images are for reference only; please refer to your individual unit for actual item.
30
Kenwood Integrated Diswasher KID60S18 Manual.indd 30
ON/OFF button. The display will show "– –"
07/12/2018 12:18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents