Grillstream GIL46SS Manual
  1. Manuals
  2. Brands
  3. Grillstream Manuals
  4. Grill
  5. GIL46SS
  6. Manual

Grillstream GIL46SS Manual

Gourmet 4 burner island hybrid
Hide thumbs
Table of Contents

Advertisement

Quick Links

Gourmet 4 Burner Island Hybrid
WARNING! FOR YOUR SAFETY, FOR OUTDOOR USE ONLY
Please read these instructions carefully and ensure that your barbecue is properly installed, assembled,
maintained and serviced in accordance with these instructions.
Failure to follow these instructions may result in serious injury and/or damage to property.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer
from whom you bought this product.
This product takes approximately 90 MINUTES
to assemble with 2 PEOPLE. The fittings pack
contains SMALL ITEMS which should be KEPT
AWAY FROM YOUNG CHILDREN. Read this
leaflet in full before commencing assembly.
GIL46SS
x 44
x 12
x 4
x 2
x 44
x 12
Carbon Monoxide Hazard
Using a barbecue inside can kill you,
it gives off Carbon Monoxide, which has no odour.
Never use a barbecue in enclosed spaces such as
a tent, home/building, vehicle or garage.
AA Battery (Not included)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GIL46SS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grillstream GIL46SS

Summary of Contents for Grillstream GIL46SS

  • Page 1 Gourmet 4 Burner Island Hybrid GIL46SS x 44 x 44 x 12 x 12 WARNING! FOR YOUR SAFETY, FOR OUTDOOR USE ONLY Please read these instructions carefully and ensure that your barbecue is properly installed, assembled, maintained and serviced in accordance with these instructions.

  • Page 2: Table Of Contents

    GIL46SS Contents Warning Information Page Location of your BBQ Page Connecting to the gas cylinder Page The hose and regulator assembly Page Testing for leaks Page Gas cylinder safety Page What is Propane Page Are all gas bottle gases the same...

  • Page 3: Warning Information

    GIL46SS CONNECTING THE GAS CYLINDER WARNING INFORMATION There are two different types of gas that can be used on your gas BBQ - Read this Operating Manual before use depending on where you live, that being either butane or propane gas.

  • Page 4: Testing For Leaks

    GIL46SS SECURING THE HOSE AND REGULATOR ASSEMBLY WHAT IS PROPANE Type A) Screw on hose connection (Fig. 4) It is a fuel gas compressed until it turns to liquid, then stored in a bottle - The BBQ’s manifold connection is 1/4” Male Thread BSP or cylinder under pressure for easy transport.

  • Page 5: Lighting Your Bbq

    • off position and wait five minutes for any accumulated gas to clear out of the BBQ before repeating procedure. LIGHTING YOUR BBQ (cont.) Grillstream Grills fit directly on top of each other - do not offset them. lo position is obtained by turning the knob fully anti-clockwise - The...

  • Page 6: Hybrid System

    DIRECTIONS FOR USE - GAS: Your charcoal should now be lit and making the tell-tale popping and The beauty of the Grillstream Hybrid System is that there is no cracking sounds that indicate this. You should now turn off the burners additional assembly or conversion process required, whether you want completely and close your Barbecue Hood.

  • Page 7: Maintenance Of Your Bbq

    To clean the Grills effectively use the Grillstream cleaning brush which has been specially designed to quickly and effectively clean your Grillstream Grills. Rinse off with clean water and dry before returning to BBQ.

  • Page 8: Troubleshooting

    GIL46SS TROUBLESHOOTING A note on fire prevention: Most fires in outdoor BBQs are caused by a build up of greases and fat, IF BBQ FAILS TO OPERATE PROPERLY or gas connections which have not been secured properly. Remember - Stop, turn off gas at its source and turn all burner controls to • off to follow the manufacturer’s instructions on proper cleaning and...

  • Page 9: Exploded Diagram

    GIL46SS Page 9...

  • Page 10: Parts List For Gsc45Mg

    GIL46SS Description Code Thermometer Hood Hood Handle Warming Rack Grillstream 295mm Grill Grillstream 395mm Gastro Grill Circular Griddle Plate Hybrid Flame Tamer Fat Channel Tube Burner Cooking Frame Assembly Main Burner Control Knob Side Burner Control Knob Gas Bottle Bracket...

  • Page 11: Fittings List

    GIL46SS FITTINGS x 44 x 12 x 12 x 44 x 44 x 12 x 12 Part Part Part x 12 x 44 x 12 x 12 x 12 x 44 x 44 x 12 x 12 M4x12 Bolt M6x12 Bolt...

  • Page 12: Assembly Instructions

    GIL46SS STEP 1 Place Gas Bottle Bracket (14) under Left Island Base Panel (15) ensuring holes line up. Then secure in place from above using 4 x Bolt (B) and 4 x Washer (D). Part x 44 x 12 M6x12 Bolt...
  • Page 13 GIL46SS STEP 2 Place Left Island Base Panel (15) upside down on a smooth, flat surface and screw in 4 x Adjustable Feet (27) using a suitable Spanner. Repeat this process for the Right Island Base Panel (21). Page 13...
  • Page 14 GIL46SS STEP 3 With the Left Island Base Panel (15) resting on its feet, attach Left Island Outer Side Panel (16) to it using 2 x Bolt (A). Part screw in 2 x Bolt (A) into indicated holes on Left Island Outer Side Panel and slide Left Island Rear Panel (17) into place.
  • Page 15 GIL46SS STEP 4 With the Right Island Base Panel (21) resting on its feet, attach Right Island Outer Side Panel (22) to it using 2 x Bolt (A). Part screw in 2 x Bolt (A) into indicated holes on Right Island Outer Side Panel and slide Right Island Rear Panel (23) into place.
  • Page 16 GIL46SS STEP 5 Part screw in 2 x Bolt (A) into indicated holes on Left Island Rear Panel (17) and slide Left Island Inner Panel (18) into place. Now secure into Left Island Base Panel (15) using a further 2 x Bolt (A) and tighten all bolts. Finally, remove adhesive tape on back of Battery Pack (49) and affix to Left Island Inner Panel in area shown.
  • Page 17 GIL46SS STEP 6 Part screw in 2 x Bolt (A) into indicated holes on Right Island Rear Panel (23) and slide Right Island Inner Panel (24) into place. Now secure into Right Island Base Panel (21) using a further 2 x Bolt (A) and tighten all bolts. Note: Side Panel has a top and bottom, please ensure it is installed the correct way up according to the illustration.
  • Page 18 GIL46SS STEP 7 Attach Right Island Upper Panel (26) to Right Island Outer and Inner Side Panels (22 & 24) using 4 x Bolt (A). x 44 Part x 12 x 44 x 12 M4x12 Bolt Page 18...
  • Page 19 GIL46SS STEP 8 Attach Left Island Upper Panel (20) to Left Island Outer and Inner Side Panels (16 & 18) using 4 x Bolt (A). Part x 44 M4x12 Bolt Page 19...
  • Page 20 GIL46SS STEP 9 Remove Ceramic Side Burner Lid (28) from Ceramic Side Burner Side Shelf (33) by pushing the axle left towards its spring and then lift right side of axle out first. Now place Ceramic Side Burner Side Shelf over Ceramic Side Burner Assembly (29), ensuring holes line up, and secure in place using 4 x Self Tapping Screw (packed with Side Burner Assembly).
  • Page 21 GIL46SS STEP 10 Place assembled Ceramic Side Burner Side Shelf (33) on to Left Island and secure in place using 6 x Bolt (A). Part x 44 M4x12 Bolt Page 21...
  • Page 22 GIL46SS STEP 11 Place Right Island Side Shelf (34) on to Right Island and secure in place using 6 x Bolt (A). Part x 44 M4x12 Bolt Page 22...
  • Page 23 GIL46SS STEP 12 Attach Left Island Cooking Frame Bracket (41) to Left Island Inner Side Panel (18) using 2 x Bolt (B) from the outside. Part x 44 x 12 M6x12 Bolt Page 23...
  • Page 24 GIL46SS STEP 13 Attach Right Island Cooking Frame Bracket (42) to Right Island Inner Side Panel (24) using 2 x Bolt (B) from the outside. Now attach Prep Table Magnet – Lower (39) to Right Island Base Panel using 2 x Bolt (A).
  • Page 25 GIL46SS STEP 14 Attach Prep Table Hinge (38) to Prep Table Leg (37) using 3 x Bolt (A) and 3 x Washer (C). Now open the hinge, ready for the next step. Note: Please take care whenever operating the Prep Table Hinge as there is a risk of trapping fingers.
  • Page 26 GIL46SS STEP 15 Attach Prep Table Leg (37) to rear side of Right Island Door / Prep Table (25) using 3 x Bolt (A). Now attach Prep Table Magnet Upper (40) to rear side of Right Island Door / Prep Table using 2 x Bolt (A).
  • Page 27 GIL46SS STEP 16 Press down on the release button on the Prep Table Hinge and fold the Prep Table Leg down until it makes a connection with the Prep Table Magnet – Upper, ready for the next step. Note: Please take care whenever operating the Prep Table Hinge as there is a risk of trapping fingers.
  • Page 28 GIL46SS STEP 17 Turn Right Island upside down on a smooth, flat surface and attach the hinges of the Right Island Door / Prep Table (25) to the under side of the Right Island Side Shelf using 4 x Bolt (F).
  • Page 29 GIL46SS STEP 18 From the inside of Left Island Inner Side Panel (18), through the top, outermost holes attach the Island Middle Shelf (43) using 2 x Bolt (B) and 2 x Washer (D). Part x 44 x 12 M6x12 Bolt...
  • Page 30 GIL46SS STEP 19 From the inside of Right Island Inner Side Panel (24), through the top, outermost holes attach the other end of the Island Middle Shelf (43) using 2 x Bolt (B) and 2 x Washer (D). Note: To allow easy access please lift Right Island Door / Prep Table and lower Prep Table Leg by gently pulling down until Prep Table Hinge is engaged with a click.
  • Page 31 GIL46SS STEP 20 Carefully lower the Cooking Frame (11) into place between the two Islands until it rests on the Left and Right Island Cooking Frame Brackets (41 & 42). Note: It is important not to trap the Main Gas Hose, Side Burner Hose or Battery Wire.
  • Page 32 GIL46SS STEP 21 From the inside, attach Cooking Frame (11) to the Left and Right Islands using 4 x Bolt (B) and 4 x Washer (D). Part x 44 x 12 M6x12 Bolt Part x 12 M6 Washer Page 32...
  • Page 33 GIL46SS STEP 22 Unscrew the pre-installed bolts and feed the Side Burner Hose into opening on the Ceramic Side Burner Assembly, line up holes and re-install the bolts. Page 33...
  • Page 34 GIL46SS STEP 23 Push Door Magnet into rectangular opening in the front of the Left Island. Slide Drip Tray (44) into place beneath cooking frame, ensuring that it sits level on both runners located at the sides. Place Ice Bucket (35) and Chopping Board (36) into opening on the top of the Right Island.
  • Page 35 GIL46SS STEP 24 Insert Door Spindle (E) into left hole of Left Island Base Panel (15). To fit Left Island Door (19) in place, first slide the hole on bottom of door over Door Spindle (E), depress spring-loaded catch on underside of Ceramic Side Burner Side Shelf and position top of door until spring-loaded catch slides into top hole.
  • Page 36 GIL46SS STEP 25 Place Hybrid Flame Tamers (8) into Cooking Frame directly above Tube Burners. The extended parts of the Hybrid Flame Tamers will rest on the angled sections at the front and back of the Cooking Frame. Place the Warming Rack (4) on the runners inside the Cooking Frame.
  • Page 37 GIL46SS STEP 26 Insert Fat Channel (9) into Cooking Frame by first sliding the thin end (spout) through right-hand side of Cooking Frame and then slotting the front lip of the Fat Channel between and Cooking Frame and Control Panel.
  • Page 38 The Circular Griddle Plate should rest on top of the upper Grillstream Gastro Grill above the cutout section. You can also swap out the Circular Griddle Plate for a variety of Grillstream Gastro Accessories including a Pizza Stone, Wok or Chicken Roaster (sold separately) for a varied cooking experience.
  • Page 39 GIL46SS STEP 28 Attach the bottle opener to the front of the Control Panel using the bolts included. Page 39...
  • Page 40 GIL46SS STEP 29 Connect Battery Wire to the Battery Pack (49) installed in Step 5. The On/Off switch for the LED Control Knob function is located on the left-hand side of the Control Panel. Use this to enable or disable the LED function. Note: The Control Knobs will light up individually when they are twisted to the on position to indicate which burners are active.
  • Page 41 GIL46SS STEP 30 Hook Grillstream Fat Cup (46) over holes in Right Island Inner Side Panel (24). This should be located directly below the spout of Fat Channel (9) to catch fat and meat juices channelled from the Grillstream system. Note: The Grillstream Fat Cup should be emptied after each cooking session or whenever full.
  • Page 42 GIL46SS STEP 31 Part screw in 8 x Bolt (A) into indicated holes at the rear of the Cooking Frame and Left / Right Island Inner Panels. Slide Triangular Support Brackets (47) over the bolts and tighten. Part x 44...

  • Page 43: Rotisserie Instructions

    GIL46SS STEP 32 - FITTING THE OPTIONAL ROTISSERIE Attach Rotisserie Box Bracket to the outside of the right-hand side of the Cooking Frame using 2 x M6x12 bolts screwed from inside the Cooking Frame. Slide runners of the Rotisserie Battery Box over the Rotisserie Box Bracket.

  • Page 44: Leak Test

    GIL46SS TESTING YOUR BBQ TESTING FOR LEAKS - DO THIS BEFORE USING YOUR BBQ. Note - Do not test for gas leaks with an open flame. If you smell gas, turn off at the source. Before first use, at the beginning of each new season, or whenever a gas cylinder is changed, you must check for gas leaks.
  • Page 46 PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Grillstream Barbecues Part of the LeisureGrow Group Dewmead Farm, New Inn Road, Hinxworth, Hertfordshire SG7 5HG, United Kingdom. Tel: +44 (0)1462 744500 E-mail:salessupport@leisuregrow.com...

Table of Contents

Save PDF