[System Mode] - Panasonic AK-UC3300G Operating Instructions Manual

Item
[YL_R PHASE]
[YL_R_R PHASE]
[NON-LINEAR MATRIX]
Item
[NON-LINEAR MATRIX SW]
[(R–G)_N]
[(R–G)_P]
[(R–B)_N]
[(R–B)_P]
[(G–R)_N]
[(G–R)_P]
[(G–B)_N]
[(G–B)_P]
[(B–R)_N]
[(B–R)_P]
[(B–G)_N]
[(B–G)_P]

[SYSTEM MODE]

[FORMAT] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item
[FORMAT]
[COLOR SETTING]
Chapter 4 Menu Operations — Menu list
Adjusts the hue between yellow and red.
[−127]...[+127]
• • Factory setting: [0]
Adjusts the hue of the color between red and the color between yellow and red.
[−127]...[+127]
• • Factory setting: [0]
Enables/disables the NON-LINEAR MATRIX function.
[OFF], [ON]
• • Factory setting: [OFF]
Adjusts the red and green matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the red and green matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the red and blue matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the red and blue matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the green and red matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the green and red matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the green and blue matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the green and blue matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the blue and red matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the blue and red matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the blue and green matrix.
[−31]...[+31]
• • Factory setting: [0]
Adjusts the blue and green matrix.
[−31]...[+31]
• • Factory setting: [0]
Sets the system format.
[2160/59.94p], [2160/29.97p], [2160/23.98p], [1080/59.94p-120fps], [1080/59.94p], [1080/29.97p],
[1080/23.98p], [2160/50p], [2160/25p], [1080/50p-100fps], [1080/50p], [1080/25p]
• • Factory setting: [2160/59.94p]
Sets the colors of entire camera system.
[NORMAL]: Enables fine image quality adjustments from the camera as with previous studio cameras.
[V-LOG]: Uses a gamma curve which can achieve a wide range of tone and exposure. Color grading will
be necessary after shooting.
• • Factory setting: [NORMAL]
NOTE
• • [V-LOG] cannot be selected when [HDR SW] is [ON] or when [GAMUT] is other than [NORMAL].
– 70 –
Description of settings
Description of settings
Description of settings