Table of Contents
Advertisement
12 <WHITE BAL> switch
Selects the white balance memory. Data can be recorded to <A> or <B>.
<PRST>: The white balance configured in [MAIN MENU] → [PAINT] → [COLOR TEMP SETTING] is set.
This switch cannot be used when the CCU or ROP is connected to the camera.
13 < > mark
Indicates the focal plane of the CMOS sensor.
Use this mark as a reference to accurately measure the focal distance from the subject.
14 Shoulder strap fittings
Used to attach the shoulder strap.
15 <USER 4> button
A user-selected function can be assigned to this button. Pressing the button performs the assigned function.
16 <DC OUT 12V 2.5A> terminal
This terminal is a DC 12 V output terminal. It provides a maximum current of 2.5 A.
If the current exceeds the rating, the current will be cut off intermittently.
NOTE
• • Immediately disconnect external equipment if the power supply to external equipment is cut off intermittently. Failure to do so may lead to a
malfunction.
• • When connecting external equipment, first fully check the polarities and current consumption. Failure to do so may lead to a malfunction.
17 Power indicator lamp
Lights up in green when power is supplied to the camera.
ON (green): The camera power is on
ON (red): The camera power is off while the camera is connected to the CCU which is turned on
OFF: The camera power is off with the CCU not connected, or the camera is connected to the CCU which is turned off
18 <POWER> switch
Selects the camera power input, or turns off the power.
<CCU>: When the camera is connected to the CCU, this switch turns on the power with the power supplied from the CCU.
<EXT>: When an external DC power supply is connected to the camera, this switch turns on the power with the power supplied from the external DC
power supply.
Center position: Turns off the power.
Chapter 2 Description of Parts — Left side
– 19 –
Advertisement
Table of Contents
