Panasonic AK-UC3300G Operating Instructions Manual page 41

[VIEW FINDER DETAIL]
Item
[VIEW FINDER DETAIL]
[ZOOM LINK]
[ZOOM LINK LEVEL]
[RETURN SIGNAL] [HD PEAK
FREQUENCY]
[HD OFFSET GAIN]
[HD CRISP]
[VIEW FINDER DISPLAY]
Item
[F NUMBER]
[ZOOM]
[FOCUS]
[FOCUS CONDITION]
[EXTENDER]
[FILTER]
[MASTER GAIN]
[OFFSET GAIN]
[SHUTTER]
[AUDIO LEVEL]
[DIGITAL EXTENDER]
[WHITE CHANNEL]
[DRS]
[CAC]
[OPT LEVEL]
Chapter 4 Menu Operations — Menu list
Adjusts the details of the viewfinder.
[0]...[23]
• • Factory setting: [7]
Enables/disables the details of the zoom-interlocked viewfinder.
[OFF], [ON]
• • Factory setting: [OFF]
Adjusts the detail level of the zoom-interlocked viewfinder.
[1]...[5]
• • Factory setting: [3]
Adjusts the peak frequency of the return signal.
[LOW], [MID], [HIGH]
• • Factory setting: [LOW]
Adjusts the detail offset gain of the return signal.
[0]...[5]
• • Factory setting: [0]
Adjusts the detail crisp level of the return signal.
[0]...[63]
• • Factory setting: [0]
Shows/hides the iris display (F value).
[OFF], [ON]
• • Factory setting: [OFF]
This is displayed when you use a lens that outputs position information.
Shows/hides the zoom position display.
[OFF], [ON]
• • Factory setting: [OFF]
This is displayed when you use a lens that outputs position information.
Shows/hides the focus position display.
[OFF], [ON]
• • Factory setting: [OFF]
This is displayed when you use a lens that outputs position information.
Shows/hides the focus information display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the extender display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the filter position display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the master gain display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the offset gain display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the electronic shutter display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the audio level (level meter) display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the digital extender display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the white balance memory display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the dynamic range stretcher display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the chromatic aberration compensation (CAC) display.
[OFF], [ON]
• • Factory setting: [OFF]
Shows/hides the display of the level of the optical signal received by the camera.
[OFF], [ON]
• • Factory setting: [OFF]
– 41 –
Description of settings
Description of settings