Panasonic AK-UC3300G Operating Instructions Manual page 55

[PEDESTAL]
Item
[MASTER PEDESTAL]
[R PEDESTAL]
[G PEDESTAL]
[B PEDESTAL]
[PEDESTAL OFFSET]
[MASTER PEDESTAL ABS DISP SWITCH]
[MASTER PEDESTAL RANGE]
[CHROMA]
Item
[CHROMA LEVEL SWITCH]
[CHROMA LEVEL]
[COLOR TEMP SETTING]
Item
[COLOR TEMP [COLOR TEMP PRE
PRESET] SWITCH]
[COLOR TEMP]
[R GAIN]
[B GAIN]
[G AXIS]
[COLOR TEMP ACH/ —
BCH]
[COLOR TEMP ACH]
[R GAIN ACH]
[B GAIN ACH]
[G AXIS ACH]
Chapter 4 Menu Operations — Menu list
Adjusts the black level of the master pedestal.
For relative value display: [−99]...[99]
For absolute value display: [−5.6%]...[58.4%]
• • Factory setting: [0]/[0%]
Sets the correction level of red to the master pedestal.
[−800]...[+800]
• • Factory setting: [0]
Sets the correction level of green to the master pedestal.
[−800]...[+800]
• • Factory setting: [0]
Sets the correction level of blue to the master pedestal.
[−800]...[+800]
• • Factory setting: [0]
Sets whether to maintain the Rch, Gch, and Bch pedestal levels after adjusting the automatic black
balance.
[ON]: Maintains the values set in [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL].
[OFF]: Sets [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL] to [0].
• • Factory setting: [OFF]
Sets the display of [MASTER PEDESTAL].
This cannot be set in HDR mode.
[ON]: Absolute value
[OFF]: Relative value
• • Factory setting: [OFF]
Sets the variable amount of the master pedestal.
[NORMAL]: Current variable amount
[WIDE]: Double of current variable amount
• • Factory setting: [NORMAL]
Enables/disables the gain adjustment of chroma.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the gain adjustment of chroma.
[−100%]...[+40%]
• • Factory setting: [0%]
Enables/disables the color temperature adjustment.
[OFF], [ON]
• • Factory setting: [OFF]
Sets the color temperature when [COLOR TEMP PRE SWITCH] is [ON].
[2000K]...[15000K]
• • Factory setting: [3200K]
Sets the correction level of red to the color temperature.
[−400]...[+400]
• • Factory setting: [0]
Sets the correction level of blue to the color temperature.
[−400]...[+400]
• • Factory setting: [0]
Sets the correction level of green to the color temperature.
[−400]...[+400]
• • Factory setting: [0]
When the camera is connected to the system, only [COLOR TEMP ACH] can be set.
Sets the color temperature when the <WHITE BAL> switch is <A>.
[2000K]...[15000K]
• • Factory setting: [3200K]
Sets the correction level of red to the color temperature.
[−400]...[+400]
• • Factory setting: [0]
Sets the correction level of blue to the color temperature.
[−400]...[+400]
• • Factory setting: [0]
Sets the correction level of green to the color temperature.
[−400]...[+400]
• • Factory setting: [0]
– 55 –
Description of settings
Description of settings
Description of settings