JVC DLA-X9900BE Instructions Manual page 66

Video image looks unnatural
Colors are unnatural
Check
Is the color space of the input signal
correctly set?
Is the image correctly adjusted?
Is the AV device or PC properly
connected?
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Video image flickers
Check
Do you see horizontally-extended,
overlapping video images?
Are you viewing the video images under
a fluorescent light?
Is "Lens Aperture" set to "Auto 1" or "Auto
2"?
* Flickers may sometimes occur upon starting up the projector unit, or immediately after the projector is changed from
floor-standing to ceiling mounted. This is attributable to the lamp or drive mechanism, and is likely not caused by
malfunction of the projector.
Projected image is dark
Check
Is the lamp near exhaustion?
Is the aperture closed?
Is "Lamp Power" set to "Low"?
Video image appears horizontally (vertically) extended
Check
Is "3D Format" set to "Side by Side"?
Is "Anamorphic" set to a setting other
than "Off"?
66
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the "Color Space" for "Input Signal" correctly.
Adjust "Color" and "Tint" accordingly.
Connect the AV device or PC properly.
Adjust the focus.
Set the unit at a correct distance from the screen.
In this case, set "3D Format" to "Auto"
This is caused by interference between the 3D glasses with
the flickers of the fluorescent light.
View with the fluorescent light turned off.
Set "Lens Aperture" to "Manual"
Check the lamp time in the "Information" menu. Prepare a
new lamp unit or replace as soon as possible when the
lamp is near exhaustion.
Set "Lens Aperture" to "Auto 1" or "Auto 2", or set to
"Manual" and open up the aperture manually.
Set "Lamp Power" to "High"
Set "3D Format" to "Auto"
Set "Anamorphic" to "Off"
Action
Action
Action
Action
Action
Refer to
P. 49
P. 49
P. 18
Refer to
P. 23
P. 74
Refer to
P. 29
—
P. 43
Refer to
P. 59
P. 60
P. 43
P. 46
Refer to
P. 29
P. 53