JVC DLA-X9900BE Instructions Manual page 54

Whole Adjust (Pixel) Operation Procedure
For making general adjustments to slight color fringing in the horizontal/vertical directions of the video image.
A Set "Adjust Area" to "Whole"
B Select "Adjust Color" and "Adjust Pattern Color"
C Select "Adjust (Pixel)", and press the [OK] button
The Adjustment mode is activated, and the selected adjustment pattern and Adjustment (Pixel) window are
0
displayed.
Adjustment (Pixel) Window
D Press the [OK] button to enter the Adjustment mode
E Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
The adjustment setting appears at the center of the Adjustment (Pixel) window.
0
Pixel Adjustment Setting
F After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
Remote Control Operation Guide
Button Name
[GAMMA] Changes "Adjust Color".
[COLOR TEMP.] Switches between "Adjust (Pixel)" and "Adjust (Fine)".
0
[3D FORMAT] Changes "Adjust Pattern Color".
[PIC ADJ.] Switches "Adjust Area".
0
54
Pixel Adjust
Whole Adjust (Pixel)
Color A. Adjust. Color P. A. Area
COLOR 3D
GAMMA
TEMP FORMAT
Pixel Adjust
Whole Adjust (Pixel)
Color A. Adjust. Color P.
COLOR 3D
GAMMA
TEMP FORMAT
Switches to "Adjust (Pixel)" when "Adjust Area" is set to "Zone".
A zone cursor appears on the adjustment pattern when the "Zone" setting is selected.
Red
H 0
V 0
Select
Back
PIC. Operate
BACK
ADJ.
H (Horizontal)
Red
H 0
V 0
Select
Back
A. Area
PIC.
Operate
ADJ.
Description of Operation
Adjustment Pattern
Color for
Adjustment
Remote Control Operation
BACK
Guide