Connecting To The Trigger Terminal; Connecting The Power Cord (Supplied Accessory) - JVC DLA-X9900BE Instructions Manual

Connecting to the TRIGGER Terminal

This Unit
Do not use it to supply power to other devices.
0
Connecting to the audio terminal of another device may cause the device to malfunction or break down.
0
Using beyond the rated value will cause the unit to malfunction.
0
The trigger terminal outputs a voltage of 12 V. Exercise adequate caution to prevent short circuit.
0
The factory setting is "Off". To change the setting, configure the "Trigger" item in the menu (P. 57).
0

Connecting the Power Cord (Supplied Accessory)

B
Precautions to prevent fire and electric shock
The power consumption of this unit is large. Please connect it directly to the wall outlet.
0
When you are not using the projector, please unplug the power cord from the outlet.
0
Connect it using only the power cord supplied.
0
Do not use a voltage other than the indicated power voltage.
0
Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.
0
Doing so may damage the power cord.
Do not unplug the power cord with wet hands.
0
20
To [TRIGGER] Terminal
Trigger Cable (Sold Separately)
A Connect the power cord supplied to the power input terminal on
the main unit
B Insert the supplied power plug into the wall outlet.
A
Power Cord
(Supplied)
Screen
Trigger Input Terminal (Ø3.5)