Advertisement
Quick Links
Advertisement
Related Manuals for Ryobi AJP-1622
Summary of Contents for Ryobi AJP-1622
- Page 1 AJP-1622 6987309-00 STD( ﾅﾝｱ ) 01-16 Original instruction...
- Page 2 Original instruction...
- Page 3 6, 7 6, 7 Original instruction...
- Page 4 Normal 90° Original instruction...
- Page 5 Original instruction...
- Page 6 The insulation of the electric cable should be faultless and use spray handle hoses, fittings and couplings that are without any cracks. If the electric cable is damaged, it should recommended by the manufacturer. be replaced by RYOBI authorized distributor. Original instruction...
-
Page 7: Safety Devices
Push the hose joint (9) onto the water connector (8) until before using the device again. Try to determine the cause of you hear a 'click' sound. the fault. If the problem repeats itself, please contact RYOBI WARNING! Jiggling the water supply hose to the right service centre. - Page 8 Turbo Nozzle Lance (Fig. 16) . Connecting the spray handle hose to the spray handle (Fig.7,8) The turbo nozzle lance (7) increases washing efficiency with Connect the spray handle hose () to the spray handle a rotating spray. () by rotating the hose coupling. Tighten with a 17mm WARNING! The turbo nozzle lance uses the narrow spray wrench.
- Page 9 • Rinse the detergent spraying attachment after use. which in turn can lead to starting difficulties. Any repair should always be made by RYOBI authorized NEVER START UP A FROZEN MACHINE. distributor with genuine spare parts.
-
Page 10: Troubleshooting
Troubleshooting Fault Cause Remedy The plug is damaged. Check the plug and fuses to see if they The machine does not run when the There is insufficient voltage. are okay. ON/OFF switch and spray handle lever The pump is locked. Manually turn over the motor. - Page 11 Original instruction...
- Page 12 RYOBI tool (hereinafter called “the Product”), for which it was not designed, or is not suited is warranted by Ryobi (herein called “the and no repairs, alterations or modifications Company”) to be free from defects in material...