Cleaning Transmission Strainer - Kubota F2890 Manual

(1) Drain plug (LH)
(2) Drain plugs (Both sides)
A Do not operate the machine immediately after
changing the transmission fluid.
A Run the engine at medium speed for a few minutes to
prevent damage to the transmission.
BCleaning Transmission Strainer
When changing the transmission fluid, remove and clean
completely the oil strainers with kerosene. Be careful not
to damage the strainer parts when installing.
(1) Strainer
(1) Strainer
(2) O ring
(3) Suction pipe
A The fine filings in the oil could injure the component
parts of the hydraulic system, it has been precision
build to withstand high pressure that the suction line
end is provided within an oil strainer.
PERIODIC SERVICE 53