Watchguard AP130 Hardware Manual page 9

Wall or Ceiling Mount with T-Rail Mount and Spacers
For ease of use, you can also affix the access point to a wall or ceiling with no t-rail system with the t-rail
15/16" mount bracket attached. Use the included spacers to place between the mounting screws and the
anchors.
Access Point Free Standing Bracket
You can optionally purchase a free standing bracket for your access point:
WatchGuard AP Universal Free Standing Bracket (WG9017)
The stand enables you to safely place your access point on a desk or other flat surface if you do not want
to mount the device on a wall or ceiling.
To install the access point in the free standing bracket, align the slot on the back of the access point with
the stand and slide the access point firmly into place.