Roksan Audio Attessa Quick Start Manual

Let's get started
Attessa Integrated Amplifier
Quick Start Guide
Dimensions & Material
Dimensions (Inc. Connect & Encoder) H76 x W432 x D383 mm
Dimensions (Exc. Connect & Encoder) H76 x W432 x D346 mm
Weight 10.2 Kg
Formed plated steel and bespoke machined anodised
Construction
aluminium front panel
Power Amplifier
Power Output (8 Ohms) 80Wrms Both Channels Driven, Nominal (THD+N <1%)
Power Output (4 Ohms) 130Wrms Both Channels Driven, Nominal (THD+N <1%)
THD+N <0.02% (1KHz, 2 channels, 1W@8 Ohms, A-Weighted)
Amplifier Type Class AB
Gain 29dB
Channel Separation >75dB @10kHz
Channel Matching <0.5dB
Signal to Noise Ratio >80dBa 1W/8R, >98dBa 75W/8R
Frequency Response 5Hz to 50KHz (-3dB)
Mains Transformer Rating 400VA
Pre- Amplifier
Volume Channel Matching <0.25dB
THD+N 0.002% (1KHz, 2Vrms at Pre-Out)
Signal to Noise Ratio >104dB (unweighted)
47k/56p loading; gain settings suitable for 12mV, 6mV,3mV
RIAA (Phono)
output cartridges
Bluetooth®
Bluetooth® Type A2DP Audio profile
Bluetooth® Codecs SBC, aptX , AAC
™
Bluetooth® Range 15m (typical)
Read me, keep me or recycle me
Roksan 24 Brook Road, Rayleigh, Essex, United Kingdom, SS6 7XJ | +44 1268 740 580 | info@roksan.com | roksan.com
Digital Inputs
Digital Coax Input up to 24bit/192kHz PCM
Digital Optical Input up to 24bit/96kHz PCM
DAC
Format Support PCM
Sampling Rate up to 192KHz/24bit
THD+N 0.001% (1KHz, 2Vrms at Pre-Out)
Signal to Noise Ratio 106dB (A-Weighted)
Power Supply
IEC Connector on rear panel
Mains transformer will self-select for either
Mains input 100-130 VAC 50/60Hz
210-240 VAC 50/60Hz
(Operational down to 85VAC with reduced output power)
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
®
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States
and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries.
2
Power on
LOUDSPEAKER OUTPUT
+
Serial Number :
- PRE OU T
/SUB
D3 D4
R L
Controls and Navigation
Standby
Using the Remote Control
Mute
Shuffle / Repeat / Repeat Once
Previous / Rewind
Play / Pause
Volume Down
Previous Source
Version 1
1
Place in suitable location
75mm
3"
Attessa CD Transport
Attessa Integrated Amplifier
3
Download MaestroUnite App
Follow the instructions on the app to finish
setting up your product.
Already have MaestroUnite?
Open the app, select
Input Display Dynamic Control Dial Volume Indicators
Using the Dynamic Control Dial
Options
Standby
Change Source
Next / Fast-Forward
Stop / Eject Disc
Volume Up
Next Source
75mm
3"
75mm
3"
Attessa Integrated Amplifier
Attessa CD Transport
+
then follow setup
3.5mm
Headphone Jack
Volume