Removing The System Board; Removing The Pcmcia Socket - Acer TravelMate C100 Service Manual

Removing the System Board

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Separating the Upper Case from the Lower Case" on page 54
6. Disconnect the sensor switch & microphone cable from the audio board connector on the main board and
then remove the two screws on the main board as shown below. Remove the main board from the lower
case with caution..

Removing the PCMCIA Socket

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Separating the Upper Case from the Lower Case" on page 54
6. See "Removing the System Board" on page 57
7. Remove the smart card FPC from the mainboard and the four screws.
.
Chapter 3 57