Removing the DIMM Upper Plate
1.
See "Removing the Battery Pack" on page 47
2.
See "Removing the Middle Covers" on page 50
3.
See "Removing the Keyboard" on page 50
4.
Remove the two screws, and then detach the DIMM upper plate from the heat sink plate.
Removing the Internal Memory Module
1.
See "Removing the Battery Pack" on page 47
2.
See "Removing the Middle Covers" on page 50
3.
See "Removing the Keyboard" on page 50
4.
See "Removing the DIMM Upper Plate" on page 53
5.
Push the latches on both sides of the socket to release the DIMM, and then remove the DIMM from the
main unit.
Removing the Modem Board
1.
See "Removing the Battery Pack" on page 47
2.
See "Removing the Middle Covers" on page 50
3.
See "Removing the Keyboard" on page 50
4.
Remove the two screws, disconnect the modem cable from the modem board, and then detach the
modem board from the main board
.
Chapter 3
53