Removing The Rtc Battery; Removing The Touch Pad Module - Acer TravelMate C100 Service Manual

Removing the RTC Battery

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Separating the Upper Case from the Lower Case" on page 54
6. Remove the tape and then detach the RTC battery from the upper case carefully.

Removing the Touch Pad Module

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Separating the Upper Case from the Lower Case" on page 54
6. First release the latches in the way as shown here. Snap off the touch pad module from the upper case
carefully.
7. Turn the touch pad board over, put it on the upper case, and then disconnect the touch pad cable from the
touch pad board. Remove the touch pad board from the upper case
.
Chapter 3 55