Removing The Main And Auxiliary Antenna; Removing The Lcd - Acer TravelMate C100 Service Manual

7. Disconnect the LCD power cable from the inverter board and then detach the button board together with
inverter board from the LCD panel carefully.. Disconnect inverter cable from the inverter board.

Removing the Main and Auxiliary Antenna

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Removing the LCD Bezel" on page 60
6. Remove the one silver screw and the other two silver screws as shown below. Detach the main antenna
at the top and auxiliary antenna at the bottom from the LCD module.
NOTE: When you reassemble the machine, please remember to put the two antennas back with the small
latches installed well and the two RF cables arranged well.

Removing the LCD

1. See "Removing the Battery Pack" on page 47
2. See "Removing the Middle Covers" on page 50
3. See "Removing the Keyboard" on page 50
4. See "Removing the LCD Module" on page 51
5. See "Removing the LCD Bezel" on page 60
6. Remove the four screws and then detach the LCD together with the protection cover from the LCD panel
carefully.
62 Chapter 3