Removing The System Memory (Ram) - Clevo W550SU1 Service Manual

Disassembly

Removing the System Memory (RAM)

Figure 6
RAM Module
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
Removal
DDR3L Up to 1600 MHz. The main memory can be expanded up to 16GB. The total memory size is automatically de-
tected by the POST routine once you turn on your computer.
a. Remove the screws
from the component
Memory Upgrade Process
bay cover.
1. Turn off the computer, turn it over, and remove the battery
b. Remove the compo-
2. Remove screws
nent bay cover. The
RAM modules will be
3. Carefully lift up the bay cover
visible at point 6 on
4. The RAM modules will be visible at point
the mainboard.
a.

Contact Warning
Be careful not to touch
the metal pins on the
module's connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.

5. Component Bay Cov-
er
• 4 Screws
2 - 10 Removing the System Memory (RAM)
- from the component bay cover
1 4
.
5
on the mainboard
6
b.
1
2
3
4
(page 2 - 5).
(Figure 6a).
)
(Figure 6b .
6
5