Initialize The Hdd Unit - Panasonic WJ-NX400K/GJ Installation Manual

7 Installation of HDD unit

Initialize the HDD unit

Open the "HDD management" page from the setting screen and format the HDD.
Step 1
Click the [HDD management] button of the setup
menu - the "Advanced setup" menu.
→ The window with the administrator name and password →
entry fields will be displayed. The window is also dis-
played when a user has already logged in as the admin-
istrator.
Step 2
Enter the "Administrator name" and the "Password"
registered on page 28, and then click the [OK] button.
→ The "HDD management" page will be displayed. →
Step 3
Confirm that the connected HDD is displayed on the
"HDD management" page.
34
(continued)
Step 4
Click "Execute" next to "Format HDD" on the "HDD
management" page.
→ HDD format screen is displayed. →
Step 5
Check the hard disk drives to format in the "Format"
field, and click the [Start] button.
→ Format check screen is displayed. →
Step 6
Click the [OK] button on Format check screen. When
"OK" is displayed on the "Results" field on the HDD
format screen, click the [Back] button.
When "Error" is displayed, format the hard disk drives again.
Click the [Operation] button to return from the "HDD man-
agement" page to the operational screen.