Table of Contents
Advertisement
AXIS Q35 Series
Setup
1. Go to Settings > Image > Day and night, and make sure that the IR cut filter is set to Auto.
2. To determine at what light level you want the camera to shift to night mode, move the Threshold slider toward Bright
or Dark.
Note
If you set the shift to occur when it's brighter, the image remains sharper as there will be less low-light noise. If you
set the shift to occur when it's darker, the image colors are maintained longer but there will be more image blur due
to low-light noise.
How to select exposure mode
There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for
specific surveillance scenes. Go to Settings > Image > Exposure and select between the following exposure modes:
•
For most use cases, select Automatic exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select Hold current.
How to stabilize a shaky image with Electronic Image Stabilization (EIS)
EIS can be used in environments where the product is mounted in an exposed location and subject to vibrations, for example, wind
or passing traffic. Turn on EIS to get a smoother and steadier image without blur.
EIS also reduces the file size of the compressed image and lowers the bitrate of the video stream.
Note
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to Settings > Image.
2. Turn on EIS.
12
Advertisement
Table of Contents
