Troubleshooting; Replacing Led Lights - John Lewis JLCHIS901 Instruction Manual

90cm cooker hood
Table of Contents

Advertisement

Instruction Manual
JLCHIS901
90cm Cooker hood

Troubleshooting

To assist in locating possible faults use the help guide below:
Problem
Cooker hood not operating effectively
The cooker hood is not
working effectively
Oil or fat collects on the
filter.
Cooker hood will not operate
The cooker hood has
switched off unexpectedly
during operation.
The cooker hood will not
start.
If none of the above suggestions resolve the problem please contact your
local John Lewis branch. Never attempt to repair the cooker hood yourself.

Replacing LED lights

Your cooker hood is fitted with LED light bulbs. They should only be
replaced by an authorised service engineer.
13
Cause
The fan speed is too low.
The filter needs cleaning or
replacing.
The air discharge outlet may
be blocked.
The filter needs cleaning or
replacing.
The cooker hood has
overheated.
The cooker hood is too
close to the hob.
No electric current is
reaching the cooker hood.
The cooker hood is not
plugged in or the power
is off.
No electric current is
reaching the cooker hood.
Correction
Select a higher fan speed.
Clean or replace the filter.
Check the air discharge outlet
and clear any blockages.
Clean or replace the filter.
Switch off the cooker hood and
wait until it has cooled down.
Re-site the cooker hood at the
correct height.
Check that the power is still on.
Replace the fuse. If you are
unsure how to replace a fuse
consult a qualified electrician.
Check that the plug is firmly
pushed in and the power is on.
Check that the power is still on.
Replace the fuse. If you are
unsure how to replace a fuse
consult a qualified electrician.

Advertisement

Table of Contents
loading

Table of Contents