Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Restoration Hardware Manuals
  4. Indoor Furnishing
  5. Baby & Child RH58KBK
  6. Manual

Restoration Hardware Baby & Child RH58KBK Manual

Chesterfield bunk bed with ladder on right/left
Hide thumbs

Advertisement

Quick Links

Download this manual
All Restoration Hardware bunk beds are designed to meet the highest safety
standards and comply with all U.S. and Canadian Bunk Bed regulations.
Assembly Instructions Bu
n
Model No: RH58KBK
Made In China
"Chesterfield Bunk Bed With Ladder On Right/Left "
Restoration Hardware Baby & Child
11640 Harre remove ektra 1 Street Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1005 West Georgia Street,
Vancouver, British Columbia V6E 4N7
!
WARNING: Read all instructions before assembling
this product. KEEP INSTRUCTIONS FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You
can also order parts writing to the address above. Include the product model number,
color, and a brief description of the part. Call 1-800-762-1751
CARE AND CLEA
NINGCAGCARE AND CLEANING
DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft dry cloth add
period & Dab spills quickly with a soft cloth. Vacuum to remove dust.
If the Bunk Bed is to be stored, store in a cool dry place andcarefully package all original
hardware to protect from loss.
Page 1 of 11

Advertisement

loading
Need help?

Need help?

Do you have a question about the Baby & Child RH58KBK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Restoration Hardware Baby & Child RH58KBK

Summary of Contents for Restoration Hardware Baby & Child RH58KBK

  • Page 1 All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Assembly Instructions Bu Model No: RH58KBK Made In China “Chesterfield Bunk Bed With Ladder On Right/Left “...
  • Page 2 Always use the ladder for entering and leaving the upper bunk. Do not use substitute parts. Contact Restoration Hardware for replacement parts. 10. Use of a night light may provide added safety precaution for a child using the upper bunk.
  • Page 3 PARTS INCLUDE (1) Left Bunk End - 1 pc (2) Right Bunk End - 1 pc (3) Back Side Rail - 2 pc (4) Front Side Rail - 2 pcs (5) Back Guard Rail - 1 pc (6) Front Guard Rail - 1 pc (7) Bed Foot - 4 pcs (8) Ladder - 1 pc (9) Twin Panel - 4 pcs...

  • Page 4: Hardware List

    HARDWARE LIST HARDWARE LIST HARDWARE & PARTS ENCLOSED Threaded Rod 17 pcs Curved Washer 17 pcs Spring Washer 17 pcs 17 pcs Spanner Wrench 1 pcs Big Screw (4cm) 17 pcs Medium Screw (2.5cm) 65 pcs Metal plate 6 pcs Allen Key 1 pcs Allen Head Bolt...
  • Page 5 Process: Step 1: Attach Bed Feet (7) to left Bunk End (1) and Repeat the procedure with Right Bunk End (2). Page 5 of 11...
  • Page 6 Step 2: Attach Front Side Rail (4) to Left Bunk End (1) and Right Bunk End (2). Insert the Threaded Rods (A) into the holes on the end of Front Side Rail (4), and insert Curved Washers (B), Spring Washers (C), and Nuts (D) onto the Threaded Rods (A) to attach theLeft Bunk end (1) and Right Bunk End (2).
  • Page 7 Step 3: Attach Back Guard Rail (5) to Left Bunk End (1) and Right Bunk End (2), by using the Allen Key (I) to tighten Allen Head Bolts (J) and Big Flat Washers (K);   Step 4: Attach Front Guard Rail (6) with Allen Head Bolts (J) and Big Flat Washers (K). For Bunks with Ladder on Left side, attach Front Guard Rail (6) to the Right Bunk End (2), so ladder sits on Left.
  • Page 8 Step 6: Lay the Twin Slat Roll (10) in between the Front Side Rail (4) and Back Side Rail (3), then tighten with Big Screws (F). -The webbing on the slats should be on the bottom side. -Numbers on the slat roll show the locations to tighten the Big Screws Page 8 of 11...
  • Page 9 Step 7: Lay the Twin Panels (9) on top of the Slat Roll (10), and tighten with Medium Screws (G). - Numbers on the panel show the locations to tighten the Medium Screws. Page 9 of 11...
  • Page 10 Step 8:Attach Ladder (8) to Front Side Rail (4) and tighten with Small Screws (L) and Small Flat Washers (M). Page 10 of 11...
  • Page 11 Step 9:Install Bedding: BEDDING SPECIFICATION: The following size mattress and Foundation are specified for use with this Bunk bed; MATTRESS:53-1/2”W×74” to 75”L×Maximum 7”H PLATFORM PANEL:CONSISTING OF 4 PANELS(74.8”W×26.6”L×0.7”H) Note: MATTRESS AND PLATFORM PANEL MUST NOT EXCEED 9” TOTAL THICKNESS Be sure to adhere to these BEDDING SPECIFICATIONS in order to avoid the possibility of failing or entrapment.