Advertisement
INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN
Do not open cabinet door more than 90 degrees when unit is laying flat on any surface. The weight of the cabinet
door opened beyond 90 degrees in a flat position may cause damage in the hinge areas. Fully open cabinet door
only when in an upright position.
TOOLS AND MATERIALS REQUIRED
1. Screwdriver
2. Carpenter's level
PARTS LIST
A. Cabinet
B. Screws (×4)
C. Glass shelf (×4)
D. Shelf Supports (×16)
MADE IN TAIWAN
page 1
Advertisement
Table of Contents
Related Manuals for Restoration Hardware INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET
Summary of Contents for Restoration Hardware INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET
- Page 1 INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET ASSEMBLY INSTRUCTIONS BEFORE YOU BEGIN Do not open cabinet door more than 90 degrees when unit is laying flat on any surface. The weight of the cabinet door opened beyond 90 degrees in a flat position may cause damage in the hinge areas. Fully open cabinet door only when in an upright position.
- Page 2 INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Measure a space for the cabinet body (A). Blocking is recommended to ensure adequate support. Inset (recessed) box measurements will vary according to cabinet model (See Below). Dimensions:19-1/4” wide, 33”...
- Page 3 INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET ASSEMBLY INSTRUCTIONS 3. Cabinet can be mounted upside down to open door from the opposite side. 4. Open the door, find screw holes in side panels. Secure cabinet into wood frame with screws (B).
- Page 4 INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET ASSEMBLY INSTRUCTIONS 6. Once installed, if the cabinet does not look level at the bottom or top, open the door. By pulling lightly on the top or bottom of the door, the outer screw of the top or bottom hinge is loosened. Align the door and re-tighten the screw.
- Page 5 INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET ASSEMBLY INSTRUCTIONS 8. Shelf Instructions. Move shelf supports (D) to the correct prepared holes and insert them. 9. Put the glass shelf (C) on the supports. 10. Repeat with remaining shelves. CLEANING AND MAINTENANCE INSTRUCTIONS To maintain and protect luster of all products, clean with soft, damp cloth only.
Need help?
Do you have a question about the INDUSTRIAL RIVET LARGE INSET MEDICINE CABINET and is the answer not in the manual?
Questions and answers