Advertisement
72.
Attach 2nd upper interior door trim as per Step 71. Position and attach all
Side Interior Door Trim (4) (1/2" x 1/2" x 35 7/8") 2 per/side. Position against door
jamb and underneath upper door trim. Attach with 4 - 1 1/2" finishing nails. Complete
lower interior door trim and both side interior trims on other side.
Door Stop
has dado cut.
73.
Attach Upper Door Stop -
dado cut (1 1/2" x 2 1/2" x 6")
underneath door header with
2 - 2 1/2 screws. Stop is pre-drilled
on angle. Evenly space between trim.
75.
Position and attach Interior Vertical Door Flange (1/2" x 2 1/2" x 70") on inside door frame
(left door from outside/right from the inside) using 6 - 1 1/4" screws. Position on inside edge of left
door frame so Flange overlaps right door frame by about 3/4".
Toll Free 1-888-658-1658
74.
Attach Lower Door Stop /Floor
Threshold (3/4" x 2 1/2" x 64") -
between door jambs. Check door align-
ment first and then attach with 4 - 1 1/4"
screws. Optional - caulk the lower edge
of threshold to prevent water penetration.
Leave small gap
between Stop
and Flange.
www.outdoorlivingtoday.com
Page 32
Lower
interior
door trim.
Stop aligned
under trim.
sales@outdoorlivingtoday.com
Advertisement
