Advertisement
Exposure Line.
42.
Screw first filler shingle down to rafters using 1 - 2 1/2" screw per panel (2 in total). Screw on slight
angle and make sure to screw into rafter. Screw slightly above 3rd row of shingles (exposure line).This
way, the screw will get covered up when you install your 2nd Filler Shingle and will prevent leaking.
43.
Slide 2nd Filler Shingle up and underneath fourth shingle row. Follow Steps 41 - 42 to align and
attach.
Toll Free 1-888-658-1658
41.
(5 1/2" wide) up and underneath second shingle
row. Push or bang filler carefully with a hammer
until evenly spaced and butt is even with other 1st
row of shingles.
Attach above
the exposure
line.
2nd Filler
Shingle.
www.outdoorlivingtoday.com
Page 22
To cover roof seam, slide one Filler Shingle
Butt - thicker.
sales@outdoorlivingtoday.com
Tip
Advertisement
