Advertisement
Long Door Header has aluminum
support strip already attached.
20.
Locate Door Header - Long (2" wide aluminum support attached already). Align step on header
facing up and out and with support strip to the inside of shed. Attach using 2 - 2 1/2" screws per end as
shown above. Hint: Have 2 helpers push Side Walls together to close any gaps between Headers.
Complete both sides. Attach support strip to short headers with 2 - 3/4" screws.
21.
Locate both Vertical Door Jambs (1 1/2" x 3 1/2" x 73") and position flush against front narrow
wall stud. The Jamb will sit flush to outside of wall siding. When positioned correctly, secure Jamb
using 6 - 2 1/2" screws. Complete both sides.
Top Siding Pc.
22.
Locate an Angled Wall Extendor and Top Siding Piece for Angled Wall Extendor (L/R). Position
top siding on wall extendor and align as shown above. Attach with 3 - 1 1/2" finishing nails to top wall
framing.
There
are
Place
finished
wall
Note: Bottom siding of wall extendor will overhang and cover siding of side wall.
Toll Free 1-888-658-1658
2 1/2" screws
left/right
top
siding
extendor
on
side
www.outdoorlivingtoday.com
3/4" screws
Push
pieces.
Use
wall
panel
frame.
Page 13
Top Siding Pc. for Angle Wall
can also be installed after Roof
is attached after Step 46.
rough
surface
Complete
both
sides
sales@outdoorlivingtoday.com
side
out.
now.
Advertisement
