Using Standard Messages - Yaesu FT5DE Instruction Manual

6. Refer to "Text input screen" in the FT5DR/DE Operating Manual to enter a message.
• Touch [MTXT] to easily input a message using a standard form.
• In the message input screen, one line is displayed for every 20 characters. Touch
[
]/[ ] to move the cursor and display other lines.
7. When input is complete, press the [BACK] key.
The entire message is displayed.
8. Touch [SEND].
• To cancel transmission, touch [BACK].
• To save the entered message as a standard message, touch [SAVE] (page 11).
• To continue message entry, touch [EDIT].
9. Touch [ALL].
• "SEND to ALL ?" appears.
• To send the message to a specific member that is within communication range,
touch the member callsign.
• Messages cannot be sent to members outside of communication range.
• The address designation "to:" is merely for displaying "ALL" or the call sign of a
specific station. If you send a message to a specific member within the communication
range, you can check whether the other station has received it.
• Even if you specify a call sign for "to:" to send a message, other stations operating
GM on the same frequency can also read the message if they are within the
communication range.
10. Touch [OK].

Using Standard Messages

The following 19 standard messages have been saved in the radio's memory as default
to help save time and effort in text input.
1 QRM
2 QRP
3 QRT
4 QRX
5 QRZ
6 QSY
7 Good morning
1. Follow steps 1 to 5 in "Creating and sending a new message" on page 9 to dis-
play the message entry screen.
2. Touch [MTXT].
• Displays the standard message list.
• For "M01" to "M10", you can register a message
comprised of up to 80 letters
8 Good job
9 Good day
10 Good evening
11 Good night
12 Send messages
13 Send pictures
14 on my way
10
15 wait for you
16 Pick me up
17 Thank you
18 OK
19 urgent
- -
- -
MTXT