Table of Contents
Advertisement
Tips:
The level of protection is based on the traffic packets number. The protection will be triggered immediately when the
number of packets exceeds the preset threshold value (the value can be set on
Parameters
>
DoS Protection Level
5.
Select
Forbid Lan Ping
6.
Select
Forbid Wan Ping
7.
Click
Save
to make the settings effective.
10. 2.
Access Control
Access Control is used to block or allow specific client devices to access your network (via wired or wireless) based on a list of
blocked devices (Blacklist) or a list of allowed devices (Whitelist).
I want to:
How can I
do that?
Settings), and the vicious host will be displayed in the
if you want to ignore the ping packets from LAN port.
if you want to ignore the ping packets from WAN port.
Block or allow specific client devices to access my network (via wired or wireless).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
Advanced
>
Security
3. Enable
Access
Control.
4. Select the access mode to either block (recommended) or allow the device(s) in the list.
To block specific device(s)
1 ) Select Blacklist.
2 ) Select the device(s) to be blocked in the
3 ) Click
Block
above the
Blacklist
automatically.
>
Access Control.
Devices Online
Devices Online
table. The selected devices will be added to
Advanced
>
System Tools
Blocked DoS Host
table.
>
System
List.
Devices in
Advertisement
Table of Contents
