Table of Contents
Advertisement
1 )
IP Range:
to your demands. When you configure the single IP address, the computer with this IP
address will get independent given bandwidth. When you configure the IP address range, all
computers in the range will share the given bandwidth.
2 )
Port Range:
is from 1 to 65535.
3 )
Protocol:
both of them.
4 )
Priority:
bandwidth for one computer. The smaller value has the higher priority.
5 )
Upstream/Downstream:
6 ) Check to enable this entry and click
6. Follow the steps above to add a rule for the other computer. And then you will get the following
table.
Done!
Now you and your roommate have an independent bandwidth.
Enter the IP address. The field can be single IP address or IP address range according
Keep the default settings. The default port range of TCP protocol or UDP protocol
Keep the default setting. Or you can choose the TCP protocol or UDP protocol or
Keep the default setting. You can change the value if you want to first guarantee the
Enter the bandwidth according to your division.
OK
to save the settings.
Advertisement
Table of Contents
