Table of Contents
Advertisement
1.
Your computer might not recognize any DNS server addresses, please manually configure DNS server.
1 ) Go to
Advanced
2 ) Enter 8.8.8.8 as Primary DNS, click Save.
8.8.8.8 is a safe and public DNS server operated by Google.
Tips:
2.
Power cycle the modem and the TP-LINK router.
1 ) Power off your modem and TP-LINK router, leave them off for 1 minute;
2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light;
3 ) Power back TP-LINK router;
4 ) Wait another 1 or 2 minutes and check the Internet access.
3.
Reset the router to factory default settings and reconfigure.
Note:
You'll have to reconfigure the router to access the Internet once the router is reset.
1 ) Reset the router to factory default settings: press and hold the RESET button for about 7 seconds and then release;
2 ) Reconfigure the router with the help of
4.
Please refer to
Upgrade the Firmware
• If the IP Address is 0 0 0 0, please try the methods below and try again:
>
Network
>
DHCP
Server;
Quick
to upgrade the firmware of the router.
Setup.
Advertisement
Table of Contents
