Important Safety Instructions; For Best Performance; Other Important Information - Panasonic VL-MWD275 Operating Instructions Manual

2. Important information
R Charge the batteries provided or identified for use
with the product only, in accordance with the
instructions and limitations specified in this
document.
R Do not heat batteries or dispose of batteries in a fire.
R Do not touch the ends of batteries (
objects.
R Handle the batteries with care. Do not allow
conductive materials such as rings, bracelets or keys
to touch the batteries, otherwise a short circuit may
cause the batteries and/or the conductive material to
overheat and cause burns.
R Only use the specified charger and AC adaptor to
charge the batteries. Failure to follow these
instructions may cause the batteries to swell or
explode.
R Avoid the use in the following conditions
– High or low extreme temperatures during use,
storage or transportation.
– Replacement of a battery with an incorrect type
that can defeat a safeguard.
– Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that
can result in an explosion.
– Extremely high temperature and/or extremely low
air pressure that can result in an explosion or the
leakage of flammable liquid or gas.

2.2 Important safety instructions

When using this product, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, or personal injury.
1. Do not use this product near water. For example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, etc.
2. Use only the power cable, power supply unit, AC
adaptor, AC cable, and batteries indicated in this
document.
Do not dispose of the battery(ies) in a fire. They may
explode. Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS

2.3 For best performance

Location/avoiding noise (main monitor/sub monitor)
The main monitor, sub monitor, and other compatible
Panasonic units use radio waves to communicate with
each other. (The product operates in the frequency range
of 1.88 GHz and 1.90 GHz with a peak transmission
power of 250 mW (max.).)
R For maximum coverage (approx. 100 m) and
noise-free communications, install your main
monitor:
8
– at a convenient, high, and central location with no
– away from electronic appliances such as TVs,
, ) with metal
– facing away from radio frequency transmitters,
R Coverage and voice quality depends on the local
environmental conditions.
R Do not place the charger near TVs, speakers, or
other devices that emit electromagnetic waves.
Failure to do so may prevent the charger from
charging the product.
Environment (main monitor/sub monitor)
R Keep the unit away from electrical noise generating
devices, such as fluorescent lamps and motors.
R The unit should not be exposed to direct sunlight.
R The unit should be kept away from heat sources such
as radiators, cookers, etc. It should not be placed in
rooms where the temperature is less than 0 °C or
greater than 40 °C. Damp basements should also be
avoided.
R Do not install the product in locations that are suspect
to sudden changes in temperature. Failure to do so
may cause condensation to form on the product
causing malfunction.
R Even when the main monitor and sub monitor are
used within 100 m of each other, obstructions can
cause weak signals, noise, interrupted
transmissions, distorted images and slow image
refresh rates. Obstructions can include:
– Metal doors or metal shutters.
– Heat insulation including aluminium foil.
– Concrete walls or walls made of galvanized iron
– If the sub monitor is being used in a different
– Many walls.
– Double insulated glass windows.
R Some types of hearing aids may receive noise from
wireless communications between the main monitor,
sub monitor, and other compatible Panasonic units.
R Operating the unit near electrical appliances may
cause interference. Move away from the electrical
appliances.
R In areas surrounded by a high electrical field,
disturbances may occur in the unit's image or sound.

2.4 Other important information

R The AC adaptor, AC cable plug, and power plug are
used as the main disconnect device. Ensure that the
obstructions between the sub monitor and main
monitor in an indoor environment.
radios, personal computers, wireless devices, or
digital cordless phones.
such as external antennas of mobile phone
stations. (Avoid installing the main monitor near
a window.)
sheet.
building, or a different part of the house, i.e. a
different floor to the where the main monitor has
been installed.