Selector Valve (Accessory Equipment) - Bush Hog 300 Series Operator's Manual

ASSEMBLY

Selector Valve (Accessory Equipment)

The Mainframe Swing, Moldboard Pivot and Tilt are
fully hydraulic. All three Cylinders can be operated
from two remote outlets. Below is a schematic
diagram showing proper routing of two Cylinders
through the Selector Valve. When installing this
Valve, observe all safety precautions as Hydraulic
Lines are under high pressure (2500 PSI). If
additional information is required concerning your
Hydraulic System, contact your Bush Hog Dealer.
300 Series 09/10 Assembly Section 3-6
© 2010 Alamo Group Inc.