Gauge Wheel (Extra Equipment); Skid Shoes & Quick Tack End Plates (Extra Equipment) - Bush Hog 300 Series Operator's Manual

ASSEMBLY

Gauge Wheel (Extra Equipment)

Mounting Holes have been provided for mounting
the Gauge Wheel to the Mainframe. Dual Wheels
with laminated puncture proof tires are optional.
Assembly of the Hydraulic Cylinder to the Gauge
Wheel Beam must be in the direction as shown in
Figure Asm-0005. It is also important to route the
hydraulic Hose through the Hose Retainers
designed for this equipment.
Skid Shoes & Quick Tack End Plates (Extra Equipment)
Skid Shoes prevent gouging and scalping and
increase Blade life. End Plates help move larger
quantities of bulk material. Install as shown in
Figure Asm-0006. Neither can be used while
ditching.
300 Series 09/10 Assembly Section 3-4
© 2010 Alamo Group Inc.