Removing the Switch Cover
CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is
recommended that only fingers are used to remove the Switch Cover.
1. Remove the Battery Pack. See "Removing the Battery Pack" on page 48.
2. Locate and remove the nine securing screws as shown.
Step
Switch Cover
Switch Cover
3. Turn the computer over and open the LCD module fully to expose the Switch Cover.
4. Lift the Switch Cover up and away.
62
Size
M2.5*3
Blue Callout
M2.5*6.5
Red Callout
Quantity
4
5
Screw Type
Chapter 3