Main - Acer Aspire 7230 Service Manual

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
Information
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
SATA Mode:
Force Single Bank:
F1 Help
ESC Exit
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Force Single Bank
Chapter 2
PhoenixBIOS Setup Utility
Main Advanced Security
[13:04:04]
[05/15/2008]
634 KB
1790 MB
[256 MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[ACHI Mode]
[Disabled]
↑↓
Select Item
←→
Select Menu
Sets the system time. The hours are displayed with 24-hour
format.
Sets the system date.
This field reports the memory size of the system. Memory size
is fixed to 3071 MB.
This field reports the Extended Memory size.
Memory size is fixed to 4094 MB.
Shows the video memory size. VGA Memory size=32 MB
Displays the logo screen while booting.
Enables, disables the system boot from LAN (remote server).
Enables, disables Boot Menu during POST.
Enables, disables D2D Recovery function. The function allows
the user to create a hidden partition on hard disc drive to store
operation system and restore the system to factory defaults.
Control the mode in which the SATA controller should operate.
When enabled, limits memory DIMM to a single bank
regardless of DIMM content.
Boot Power
F5/F6 Change Values
Enter Select Sub-Menu
Description
Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9 Setup Defaults
F10 Save and Exit
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/
YYYY
(month/day/year)
N/A
N/A
N/A
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Disabled or
Enabled
Option: Enabled or
Disabled
Option: AHCI Mode
or IDE Mode
Option: Disabled or
Enabled
31