Note: If you cannot locate the "Super.ROM" file in your driver disk, visit our website at
www.supermicro.com
it "Super.ROM".
2. While the system is turned off, insert the USB device that contains the new BIOS binary
image (SUPER.ROM).
3. Power on the system.
4. After the system is turned on, the system will enter the BIOS Recovery menu. Select
"Proceed with flash update" to start the BIOS recovery process. DO NOT INTERRUPT
THIS PROCESS UNTIL IT IS FINISHED!
to download the BIOS image into a USB flash device and rename
99
Appendix C: UEFI BIOS Recovery