Supermicro H12SSL Series User Manual page 76

H12SSL-i/C/CT/NT User's Manual
Network Configuration
Configured
Select Enabled to activate IPv4 network configuration. The options are Enabled and Disabled.
*If the item above is set to Enabled, the following item will become available for
configuration:
Enable DHCP
This feature allows the user to select the source of the IP address for this computer. If
Disabled is selected, you will need to know the local IP address of this computer and enter it
to the system manually in the field. If Enabled is selected, the system will search for a DHCP
(Dynamic Host Configuration Protocol) server in the network that it is attached to and request
the next available IP address for this computer. The options are Enabled and Disabled.
*If the item above is set to Disabled, the following items will become available for
configuration:
Local IP Address
This item sets and displays the Local IP address for this computer. This should be in decimal
and in dotted quad form.
Local Net Mask
This item sets the sub-network that this computer belongs to. The value of each three-digit
number separated by dots should not exceed 255.
Local Gateway
This item sets the Gateway IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 172.31.0.1).
Local DNS Servrs
This item sets the address for the local DNS servers for this computer. This should be in
decimal and in dotted quad form (i.e., 172.31.0.1).
Save Changes and Exit
Click this to save the changes above.
iSCSI Configuration
iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.
Once the name of the iSCSI Initiator is entered into the system, configure the proper settings
for the following items.
76