Supermicro H12SSL Series User Manual page 74

H12SSL-i/C/CT/NT User's Manual
IPv6 HTTP Support
This setting allows you to Disable or Enable IPv6 HTTP boot support. If disabled, IPv6
HTTP boot support will not be available.
PXE Boot Wait Time
This setting allows you to set in a number field the wait time to press the ESC key to abort
the PXE boot. The default value is 0.
Media Detect Count
This setting allows you set in a number field the number of times presence of media will
be checked. The default value is 1.
USB Configuration
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled and Auto.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The options are Enabled, and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Enabled, and Disabled.
SATA Configuration
This section displays the detected SATA devices installed on the system.
SATA Information
SATA Enable
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Disabled, Enabled, and Auto.
SATA Hotplug
This item enables or disables the onboard SATA controller's hot plug feature (PCH). The
options are Disabled and Enabled.
74